small smart solutions

Pumps

Key facts of the CPP‑1 pump family:

Pump­ing of var­i­ous liq­uids and gases Small foot­print
Medi­um only in con­tact with med­ical grade sil­i­cone tube Bidi­rec­tion­al pump­ing possible
Eval­u­a­tion kit avail­able that allows to con­trol up to 4 pumps via plug & play to the USB port of a computer Light­weight

CPP‑1 150

For low pump rates in flu­ids and gases.

Flow rate: 10 μl to 150 μl/min

Micropump CPP-1 150

Datasheet CPP‑1 150

CPP‑1 180-ZM

For very low pump rates in flu­ids and gas­es in com­bi­na­tion with long lifetime.

Flow rate: 0.15 μl to 180 μl/min

Micropump CPP-1 180-ZM

Datasheet CPP‑1 180-ZM

CPP‑1 800

For high pump rates in flu­ids and gases.

Flow rate: 70 μl to 800 μl/min

Micropump CPP-1 800

Datasheet CPP‑1 800

CPP‑1 1000-ZM

For high and pre­cise pump rates in flu­ids and gas­es in com­bi­na­tion with long lifetime.

Flow rate: 2 μl to 1700 μl/min

Cicropump CPP-1 1000-ZM

Datasheet CPP‑1 1000-ZM

Evaluation Kits

The pump eval­u­a­tion kits are designed to con­trol up to 4 pumps at once with a plug & play approach.

Hardware

You can order eval­u­a­tion kits that can either con­trol 2 or 4 CPP‑1 pumps at once. They are oper­at­ed via USB to a com­put­er run­ning Win­dows 10.

Evaluation kit for 2 CPP-1 micropumps

Man­u­al and Datasheet for the eval­u­a­tion kits

Software

The eval­u­a­tion kits come with Open­Source firmware and the fron­tend soft­ware “JT Pump Dri­ver”. You can down­load them from:

Firmware: https://github.com/JobstTechnologies/JT-PumpDriver-Firmware/releases
(How to per­form a firmware update if nec­es­sary is explained in the man­u­al.)

Fron­tend soft­ware “JT Pump Dri­ver” for Win­dows 10: https://github.com/JobstTechnologies/JT-Pump-Driver/releases
(You don’t need to install it, thus no admin per­mis­sions are necessary.)

Evaluation products for professionals to be used solely for research and development purposes!
Not for medical and diagnostic use. Not to be used on humans. For more information contact IST AG.